Testing Instruments

Automatic horizontal tensile tester TP-B11
Automatic horizontal tensile tester TP-B11
  • Sample (size) length: 90 to 200 mm
  • Sample width: 15 mm, 25 mm, 50mm
  • Measuring range: 0 to 30, 0 to 100 N,0 to 300 N
  • Accuracy: ± 1 %
Automatic horizontal tensile tester TP-B12
Automatic horizontal tensile tester TP-B12
  • Sample (size) length: 180 mm (180, 150, 100, 90, 50 mm adjustable)
  • Sample width: 15 mm
  • Measuring range: 0 to 30, 0 to 100 N,0 to 300 N, 0 to 500 N, 0 to 1000 N
  • Accuracy: ± 1 %
Bekk Smoothness tester TP-L20
Bekk Smoothness tester TP-L20
  • Measuring scope: ( 1 to 9999) s, divided in to (1 to 15) s, (15 to 300) s, (300 to 9999) s, the automatic (no. more than 200 s)
  • Accuracy: ±0.1 s within 300 s
  • Vacuum system volume (ml): Bigger volume: 380 ± 1<br/> Smaller volume: 38 ± 1
  • Contact pressure: 100 ± 2 kPa
Carton compression tester TP-I10
Carton compression tester TP-I10
  • Measuring range: 0.1 to 10 kN
  • Indication error: < ± 1%
  • Platen Size: 500×500 mm (customized)
  • Operating stroke: 500 mm (customized)
Carton compression tester TP-I11
Carton compression tester TP-I11
  • Measuring range: 1 to 50 kN
  • Indication error: < ± 1%
  • Platen Size: 800×800 mm/ 1000×1000 mm/ 1200×1200 mm/ 1500×1500 mm (customized)
  • Operating stroke: 800 mm/ 1000 mm/ 1200 mm/ 1500 mm (customized)
COBB sample cutter TP-C30
COBB sample cutter TP-C30
  • Sample diameter: 125 mm
  • Sample error: ± 0.2 mm
  • Sample Thickness: 0.1 to 1.0 mm
  • Dimension: 240×288×435 mm
Coefficient of friction tester TP-D10
Coefficient of friction tester TP-D10
  • Measurement range: 0.01 to 10 N
  • Slider weight: 200 g
  • Slider size: 63×63 mm
  • Testing accuracy: ± 2 %
Crush tester TP-L10
Crush tester TP-L10
  • Measurement range: 5 to 500 N, 50 to 3000 N
  • Resolution: 1 N
  • Accuracy: ± 1 %
  • Variability: ≤ 1 %
Electronic bending stiffness tester TP-E10
Electronic bending stiffness tester TP-E10
  • Testing speed: 200° ± 20° / min
  • Test range: 1 to 10000 mN
  • Indicating Error: ± 1 %
  • Testing length: 5, 10, 15, 20, 25, 50 mm
Electronic Tearing tester TP-J21
Electronic Tearing tester TP-J21
  • Capacity: 10 -16000 mN
  • Resolution: 0.1 mN
  • Tearing arm: 104 ± 1 mm
  • Tearing angle: 27.5° ± 5°
Folding endurance tester TP-M10
Folding endurance tester TP-M10
  • Measuring scope: 0 to 99999 s
  • Folding angle: 135° ± 2°
  • Tensile scope: 4.9 to 14.7 N
  • Folding head suture size: 0.25 mm, 0.50 mm, 0.75 mm, 1.00 mm
Ink rubber tester TP-F10
Ink rubber tester TP-F10
  • Sample size (L*B): 230×50 mm (can join short samples together)
  • Rub pressure: 20 ± 0.2 N
  • Friction speed: 43 times / min
  • Friction area (L*B): 155×50 mm
Internal Ply bond Tester TP-J11
Internal Ply bond Tester TP-J11
  • Capacity: A: 20 to 500 J/m2 B: 500 to 1000 J/m2
  • Impact angle: 90°
  • Unit: Lb-ft/in2  J/m2
  • Error: A: ± 1 J/m2 B: ± 2 J/m2
Mullen burst tester TP-K10
Mullen burst tester TP-K10
  • Measurement range: 0 to 5600 kPa
  • Accuracy: ± 0.5 % F.S.
  • Compression speed: 170 ± 15 ml/min
  • Clamp pressure: ≥ 690 kPa
Mullen burst tester TP-K11
Mullen burst tester TP-K11
  • Measurement range: 0 to 1600 kPa
  • Accuracy: ± 0.5 % F.S.
  • Compression speed: 95 ± 5 ml/min
  • Clamp pressure: ≥ 430 kPa
Paper air permeability tester TP-J10
Paper air permeability tester TP-J10
  • Measuring range: 0 to 1000 ml/min
  • Test area: 10 ± 0.02 cm2
  • Area differential pressure: 1 ± 0.01 kPa
  • Inner diameter of grip ring: 35.68 ± 0.05 mm
Paper and cardboard thickness meter TP-E20
Paper and cardboard thickness meter TP-E20
  • Measuring range: 0 to 4 mm
  • Accuracy: 0.01 or 0.001 mm
  • Gauge: Analogue gauge display
  • Contact pressure (to create false weight): 100 ± 10 kPa
Paper and cardboard thickness meter TP-E21
Paper and cardboard thickness meter TP-E21
  • Measuring range: 0 to 20 mm
  • Accuracy: 0.01 mm
  • Gauge: Analogue gauge display
  • Contact pressure (to create false weight): 20 ± 0.5 kPa
Paper tearing tester TP-J20
Paper tearing tester TP-J20
  • Measuring range: 0 to 1000 mN
  • Resolution: 0.1 mN
  • Indication error: ± 1 %
  • Tearing arm: 104 ± 1 mm
Pulp beating (refining) freeness tester TP-C10
Pulp beating (refining) freeness tester TP-C10
  • Measurement range: 0 to 100° SR
  • Sealed testing speed: 100 ± 10 mm/s
  • Volume of distilled water: 1000 ± 5 ml
  • Draining time: 149 ± 1 s
Puncture strength tester TP-J12
Puncture strength tester TP-J12
  • Measuring range: A (1 to 6) J indicating error ± 0.05 J<br/> B (1 to 12) J indicating error ± 0.05 J<br/> C (1 to 24) J indicating error ± 0.05 J<br/> D (1 to 48) J indicating error ± 0.05 J<br/> The indicating errors w.r.t measurement range of 20 to 80 %
  • Frictional resistance: <0.25 J
  • Pyramid dimension: Three sides: 60×60×60 mm, height 25 ± 0.7 mm, Arris edge fillet radius 1.5 ± 0.1 mm
  • Dimension: 800×470×840 mm
Softness tester TP-H10
Softness tester TP-H10
  • Measuring range: 10 to 1000 mN
  • Division value: 1 mN
  • Accuracy: ± 1%
  • Indicating Error: ≤ 0.5
Standard strip cutter TP-G10
Standard strip cutter TP-G10
  • Sample width: 15 mm
  • Sample maximum length: 300 mm
  • Parallelism: ≤ 0.1 mm
  • Dimension: 240×520×70 mm
Tensile Stiffness Tester TP-B10
Tensile Stiffness Tester TP-B10
  • Sample (size) length: 38×70 mm
  • Measuring range: (1-500) mN.m (divided into 7 small ranges)
  • Indication error: 0.02
  • Test speed: (200° ± 20°)/ min
Vertical tensile tester TP-B20
Vertical tensile tester TP-B20
  • Sample (size) length: 0 to 200 mm adjustable
  • Sample width: 15 mm
  • Measuring range: 0 to 30 N (tissue paper), 0 to 100 N,0 to 300 N, 0 to 500 N, 0 to 1000 N
  • Accuracy: ± 1 %
Water absorption tester TP-C20
Water absorption tester TP-C20
  • Measurement range: 0 to 200 mm
  • Specimen size: 15×250 mm
  • Division value: 1 mm
  • Number of specimen holders: 5
Water absorption tester- Cobb Tester TP-C21
Water absorption tester- Cobb Tester TP-C21
  • Metal Cylinder inner area: (100 ± 0.2) cm2
  • Metal Cylinder height: 50 mm
  • Metal roller width: (200 ± 0..5) mm
  • Metal roller weight: (10 ± 0.5) kg
Whiteness and chromaticity tester TP-A10
Whiteness and chromaticity tester TP-A10
  • Sample (size) length: Diameter ≥30 mm, Thickness ≤ 40 mm
  • Measurement mode: Diffuse reflection factor Rx, Ry, Rz, stimulus value Y10, X10, Z10, chromaticity coordinates x10, y10, z10; lightness L *, chroma a * b *, chroma C * ab, hue angle h * ab, dominant wavelength λd, excitement purity Pe, color difference ΔE * ab, lightness difference ΔL *, chroma difference ΔC * ab, hue difference ΔH * ab, Hunter system L , A, b
  • Stability: ≤ 0.1 within 30 min
  • Accuracy: Chromaticity co-ordinate 0.0001
Whiteness meter TP-A11
Whiteness meter TP-A11
  • Sample (size) length: Diameter ≥30 mm, Thickness ≤ 40 mm
  • System: D/0 lighting geometrical viewing conditions, diffuser diameter (d) 150mm, testing hole diameter 30mm
  • Light source: D65 as illuminating source
  • Zero drift: ≤ 0.1 %
Aging Oven TAO-A10
Aging Oven TAO-A10
  • The maximum temperature: 300°C
  • Temperature fluctuation: Within ± 0.5°C
  • Temperature uniformity: Within ± 1°C
  • Rotate speed of the turntable: 11 r/min to 12r/min, turntable dimension diameter: 285 mm
Charpy/ Izod Impact Tester TCI-A10
Charpy/ Izod Impact Tester TCI-A10
  • Impact Speed & Energy (charpy): 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J
  • Impact energy (Izod): 3.5 m/s for 1J, 2J, 4J, 5J, 7.5J, 15J, 25J
  • Resolution of impact energy: 0.001 J
  • Pendulum up angle: 160°
Falling Weight Impact Tester TFWT-A10
Falling Weight Impact Tester TFWT-A10
  • Temperature range: 10 to 35°C
  • Maximum falling height: 2000 mm
  • Resolution of displacement: 1 mm
  • Height error: < ± 2 mm
Heat sealer THS-A10
Heat sealer THS-A10
  • Seal temperature: Room temperature -250°C
  • Control accuracy: ± 0.2°C
  • Dwell time: 0.1 S to 999.9 S
  • Dwell pressure: 0.05 to 0.7 MPa
Lasting adhesive tester TLAT-A10
Lasting adhesive tester TLAT-A10
  • Standard roller: 2000 ± 50 g
  • Testing stations: 3
  • Dimension (L*W*H) tester: 320×210×550 mm (3 stations)
  • Weight for stations: 10 kg (3 stations)
Lasting adhesive tester TLAT-A11
Lasting adhesive tester TLAT-A11
  • Standard roller: 2000 ± 50 g
  • Testing stations: 6
  • Dimension (L*W*H) tester: 650×210×550 mm (6 stations)
  • Weight for stations: 15 kg (6 stations)
Melt flow Indexer TMFI-A10
Melt flow Indexer TMFI-A10
  • Measuring range: 0.01 to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm/ 10 min (MVR), 0.001 to 9.999 g/cm (melt density)
  • Measuring rate: 0.001 S
  • Temperature range: 50 to 400°C
  • Temperature precision: ± 0.5°C
Melt flow Indexer TMFI-A11
Melt flow Indexer TMFI-A11
  • Measuring range: 0.01to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm3/ 10 min (MVR), 0.001 to 9.999 g/ cm3 (melt density)
  • Measuring rate: 0.001 S
  • Temperature range: 50 to 400°C
  • Temperature precision: ± 0.5°C
Oxygen Index Tester TOIT-A10
Oxygen Index Tester TOIT-A10
  • Resolution: 0.1 % O2
  • Measuring range: 0 to 100 % O2
  • Precision: ± 0.4 % O2
  • Response time: < 10 S
Primary adhesive tester TPAT-A10
Primary adhesive tester TPAT-A10
  • Inclined adjustable angle: 0 to 40°
  • Panel width: 120 mm
  • Test area width: 80 mm
  • Standard steel balls: 1/32 to 1 inch
Vacuum Leak Tester TVLT-A10
Vacuum Leak Tester TVLT-A10
  • Vacuum degree: 0 to 90 KPa
  • Accuracy: 1 % FS
  • Resolution: 0.1 KPa
  • Vacuum chamber effective size: 270 × 210 mm
Vicat softening temperature & HDT machine TVHT-A10
Vicat softening temperature & HDT machine TVHT-A10
  • Operating temperature: Ambient temperature to 300°C
  • Heating rate: 50°C/ h (5 ± 0.5°C/ 6 min) , 120°C/ h (12 ± 1°C/ 6 min)
  • Maximum temp. error with heating speed: ± 5°C under 50°C/ h, ± 1°C under 120°C/ h
  • Range of deformation: 0 to 10 mm
DIN abrasion tester TDAT-A10
DIN abrasion tester TDAT-A10
  • Test arm weight: 2.5 N
  • Additional Loads: 2.5 ± 0.1 N, 5 ± 0.1 N, 10 ± 0.1 N,
  • Idler: 150 mm
  • Abrasion stroke: 40 ± 0.2 M
Mooney viscometer TMV-A10
Mooney viscometer TMV-A10
  • Control temperature range: Normal temperature to 200°C
  • Temperature display resolution: 0.01°C
  • Temperature control accuracy: ± 0.3°
  • Calibration accuracy: Mooney value ± 0.5
No rotor rheometer TNRR-A10
No rotor rheometer TNRR-A10
  • Temperature tester: Room temperature to 200°C
  • Temperature display resolution: 0.1°C
  • Temperature control accuracy: ≤ ± 0.3°C
  • Rotor speed: 100 times/ min
Rubber low temperature brittleness tester TRBT-A10
Rubber low temperature brittleness tester TRBT-A10
  • Temperature range: -60°C to 0°C
  • Temperature accuracy: ± 0.5°C
  • Impact speed: 2 m/s ± 0.2 m/s
  • Temperature fluctuation: <± 0.5°C
Rubber Low Temperature Brittleness Tester TRBT-A11
Rubber Low Temperature Brittleness Tester TRBT-A11
  • Temperature control range: Room temperature to -70 ℃ (room temperature ≤ 25 ℃）
  • Temperature accuracy: ± 0.3 ℃
  • Impact speed: 0℃ to -30℃ around 2.5 ℃/min </br> '-30℃ to -40℃ around 2.5 ℃/min </br> '-40℃ to -70℃ around 2.0 ℃/min</br>
  • Max dimension L × W × H: 910 × 510 × 860 mm
Rubber-weiss plasticity testing machine TRWM-A10
Rubber-weiss plasticity testing machine TRWM-A10
  • Temperature range: RT 50° to 300°
  • Temperature accuracy: ± 1°
  • Measuring range: 0.01 to 25 mm
  • Accuracy: ± 0.01 mm
Three roll mill machine TRMM-A10
Three roll mill machine TRMM-A10
  • Mixed capacity: 0.5 to 1 kg, 2 to 3 kg, 5 to 7 kg
  • Temperature range: RT to 300°C
  • Temperature control system: PID control
  • Display: LED display
Digital Brinell hardness Tester TDBH-A10
Digital Brinell hardness Tester TDBH-A10
  • Test force: 612.5 N, 980 N, 1225 N
  • Brinell hardness test: 1837.5 N, 2450 N, 4900 N/7350 N, 9800 N, 14700 N/29400 N
  • Hardness measuring area: 8 to 650 HBW (hard metals steel ball)
  • Hardness indication: Digital display
Digital low load Vickers Hardness tester TDVH-A10
Digital low load Vickers Hardness tester TDVH-A10
  • Test force: 9.8 N, 49 N, 98 N, 196 N, 294 N, 490 N
  • Hardness value symbol: HV1, HV5, HV10, HV20, HV30, HV250
  • Error range in display: ± 3.0 %, ± 2.0 %
  • Hardness indication: Digital display
Portable Vibration Calibrator LPVC-A10
Portable Vibration Calibrator LPVC-A10
  • Frequency (continually adjustable): 10 Hz to1280 Hz + 0.01 %
  • Amplitude acceleration ( at 30m/s2 pk ): 40 Hz to 320 Hz + 0.3 dB + 1 digit
  • Amplitude velocity ( at 25mm / sec pk ): 40 Hz to 320 Hz + 0.5dB +1 digit
  • Amplitude displacement ( at 50 μm pk-pk ): 40 Hz to 320 Hz + 0.5 dB + 1 digit
Rockwell hardness meter (motorized type) TRHM-B10
Rockwell hardness meter (motorized type) TRHM-B10
  • Preliminary test force: 98 N
  • Total test force: 588, 980, 1471 N
  • Brinell hardness test: 306, 613, 1839 N
  • Vickers hardness test: 294, 588, 980 N
Rockwell hardness meter TRHM-A10
Rockwell hardness meter TRHM-A10
  • Preliminary test force: 98 N
  • Total test force: 588, 980, 1471 N
  • Total test force dwell time: 0 to 30 S
  • Hardness indication: Analogue display
Rockwell hardness meter TRHM-A11
Rockwell hardness meter TRHM-A11
  • Preliminary test force: 98 N
  • Total test force: 588, 980, 1471 N
  • Total test force dwell time: 1 to 30 S
  • Hardness indication: Digital display
Benchtop gloss meter TBGM-A10
Benchtop gloss meter TBGM-A10
  • Test angle: 60°
  • Gloss aperture: 2 × 3 mm
  • Measurement range: 0 to 1000 GU
  • Repeatability: 0.2 GU (0 to 100 GU), 0.2 % GU (100 to 1000 GU)
Soil moisture meter TSMM-A10
Soil moisture meter TSMM-A10
  • Measurement range: 0 to 80 %
  • Resolution: 0.1
  • Accuracy: ± 2 % n (non-saturation condition)
  • Needle: 280 mm
Soil moisture meter TSMM-A11
Soil moisture meter TSMM-A11
  • Measurement range: 0 to 90 %
  • Resolution: 0.1 or 0.01
  • Accuracy: ± 5 % n (non-saturation condition)
  • Needle: 235 mm
Soil moisture meter TSMM-A12
Soil moisture meter TSMM-A12
  • Measurement range: 0 to 60 %
  • Resolution: 0.1
  • Accuracy: ± 5 % n (non-saturation condition)
  • Needle: 280 mm
Soil nutrient tester TSNA-A10
Soil nutrient tester TSNA-A10
  • Measuring range: 0.001 to 9999
  • Stability: A (absorbency of light) <0.003 within 3 mins
  • Linearity error: <3.0 %
  • Repeatability error: A (absorbency of light) <0.005
Soil nutrient tester TSNA-A11
Soil nutrient tester TSNA-A11
  • Measuring range: 0.001 to 9999
  • Stability: A (absorbency of light) <0.003 within 3 mins
  • Linearity error: <3.0 %
  • Repeatability error: A (absorbency of light) <0.005
Soil Salinity tester TSST-A10
Soil Salinity tester TSST-A10
  • Salinity Measurement range: 0.00 to 19.99 ms/cm
  • Measuring accuracy: EC ± 2% full scale
  • Temperature Measurement range: -5 to 50°C
  • Temperature accuracy: ± 0.5°C
Soil water hardness meter TSHM-A10
Soil water hardness meter TSHM-A10
  • Maximum load: 100 kg ( kg and N can be switched automatically)
  • Resolution: 0.01 g
  • Accuracy: ± 0.5 %
  • Measuring depth: 0 to 40 mm
Soil water hardness meter TSHM-A11
Soil water hardness meter TSHM-A11
  • Maximum load: 100 kg ( kg and N can be switched automatically)
  • Resolution: 0.01 g
  • Accuracy: ± 0.5 %
  • Measuring depth: 0 to 450 mm
Soil Water potential tester TSWT-A10
Soil Water potential tester TSWT-A10
  • Measuring range: 0 to 100 kPa
  • Resolution: 0.01 kPa
  • Accuracy: ± 1 kPa
  • Soil temperature measuring range: -55 to 105°C

Air Permeability Tester

Air Shower

Airborne Particle Counters

Alloy Analyzer

Amino Acid Analyzer

Autoclaves

Automatic Glassware Washer

Balances

Ball Mill Machine

Baths and Circulators

Biochemistry Analyzer

Blood Bag Tube Sealer

Blood Collection Monitor

BLOOD THAW MACHINE

Bottle Top Dispenser

Cabinets

Centrifuge

Chillers

Chromatography

CO2 Incubator

Colony Counter

Color Assessment Cabinet

Colorimeters

Dehumidifier

Density Meter

Differential Scanning Calorimeters

Differential Thermal Analyzers

Dispersion Machine

Dosimeter

Drug Detector

Electrophoresis System

Elemental Analyzer

Environmental Monitoring Equipments

ESR Analyzer

Fiber Analysis

Flame Photometer

Flammability Tester

Fluorescence Analyzer

Fluorometer

Freeze Dryers

Freezers

Fume Extractor

Fume Hood

Gel Documentation

Gel Strength Test System

Gene Electroporator

Glassware Drying Cabinet

Handheld Homogenizer

Heating Mantle

HPLC

Hybridization Oven

Hybridization System

Hydrogen Peroxide Generator

Ice Makers

Incubator

IR Carbon Sulphur Analyzer

Jar Testers

Kjeldahl Systems

Lab Refrigerator-Freezer Combination

Laboratory Shakers and Mixers

Laminar Flow Canopy

Laser Theodolite

Latex Stability Tester

Leather Softness Tester

Magnetic Stirrers and Hotplates

Media Dispensing System

Melting Point Apparatus

Metal Detector

Microplate Reader & Washer

Microscope

Microtome

Microwave Digestion System

Milk Analyzers

Moisture Analyzer

Muffle Furnace

Nucleic Acid Purification System

Oil And Grease Analyzer

Opacity Meter

Osmometer

Oven

Oven Incubator

Paraffin Trimmer

Particle Counter

Particle Size Analyzer

Pathology Workstation

Peristaltic Pump

Petroleum Testing

Pharmaceutical Testing

Pipettes

Plasma Extractor

Plate Sealer

Platelet Agitator and Incubator

Polarimeter

Polystyrene Round PET Bottle

Potentiometric Titrator

Refractometer

Refrigerators

Rotary Evaporator

Safety Containment Cabinets

Sample Concentrator

Scintillation Counter

Semi-automatic Bio-chemistry Analyzer

Slide Dryer

Solar Powered Products

Sound Level Analysis

Soxhlet Apparatus

Spectrometer

Spectrophotometer

Stomacher

Stroboscope

Tachometer

Test Chamber

Testing Instruments

Thermal Cycler

Thermo-Shakers

TOC Analyzer

Tube Furnace

Ultrasonic Cleaner

Ultrasonic Homogenizer

UV Air Sterilizer

UV Analyzer

UV Pass Box

V-shell Blender

Vacuum Filtration Unit

Vacuum Packing machine

Vacuum Pump

Vacuum Pycnometer

Vacuum Spin Coater

Viscometer

Washer Disinfector

Water Distillers

Water Purification System

Water Purifier

Water Testing

Wind Meter (Anemometer)

X-Ray Machine


Popular Categories

Navigation

Contact Us Map