Soil water hardness tester TSWH-A11 is a handheld design, model with large backlight LCD display and high resolution to show inverted reverse function of numbers on screen. With high accuracy measurement, it maintains the peak value display until manually zero value adjustment. It holds automatic peak function value on display screen for 2 seconds before automatic elimination.
| Maximum load | 100 kg ( kg and N can be switched automatically) |
| Resolution | 0.01 g |
| Accuracy | ± 0.5 % |
| Measuring depth | 0 to 450 mm |
| Environmental temperature | 0 to 60°C |
| Allowable overload | 1.5 |
| Memory storage | Stores up to 896 groups of data |
| Power supply mode | 5 Nickel Cyanogen |
| Battery capacity | Continuous operated battery, 6 to 8 hrs |
| Gross weight | 13 kg |
| Power supply | Chargeable AC 100 to 240 voltage |
- Large LCD display with backlight function
- Data output function
- Data transferrable to PC
- Large capacity memory storage
- Gravity acceleration setting function
- High quality charging power supply
- Full scale calibration
- Auto-off time setting 10 to 90 min automatic shutdown
Used for soil water hardness measurement of dry to normal & moist soil for quality analysis & testing purpose.
Soil Testing Instruments
Soil Salinity tester TSST-A10
- Salinity Measurement range
- 0.00 to 19.99 ms/cm
- Measuring accuracy
- EC ± 2% full scale
- Temperature Measurement range
- -5 to 50°C
Soil nutrient tester TSNA-A10
- Measuring range
- 0.001 to 9999
- Stability
- A (absorbency of light)
- Linearity error
Soil nutrient tester TSNA-A11
- Measuring range
- 0.001 to 9999
- Stability
- A (absorbency of light)
- Linearity error
Soil Water potential tester TSWT-A10
- Measuring range
- 0 to 100 kPa
- Resolution
- 0.01 kPa
- Accuracy
- ± 1 kPa
Paper Testing Instruments
Automatic horizontal tensile tester TP-B11
- Sample (size) length
- 90 to 200 mm
- Sample width
- 15 mm, 25 mm, 50mm
- Measuring range
- 0 to 30, 0 to 100 N,0 to 300 N
Folding endurance tester TP-M10
- Measuring scope
- 0 to 99999 s
- Folding angle
- 135° ± 2°
- Tensile scope
- 4.9 to 14.7 N
Automatic horizontal tensile tester TP-B12
- Sample (size) length
- 180 mm (180, 150, 100, 90, 50 mm adjustable)
- Sample width
- 15 mm
- Measuring range
- 0 to 30, 0 to 100 N,0 to 300 N, 0 to 500 N, 0 to 1000 N
Whiteness meter TP-A11
- Sample (size) length
- Diameter ≥30 mm, Thickness ≤ 40 mm
- System
- D/0 lighting geometrical viewing conditions, diffuser diameter (d) 150mm, testing hole diameter 30mm
- Light source
- D65 as illuminating source
Plastic Testing Instruments
Lasting adhesive tester TLAT-A10
- Standard roller
- 2000 ± 50 g
- Testing stations
- 3
- Dimension (L*W*H) tester
- 320×210×550 mm (3 stations)
Falling Weight Impact Tester TFWT-A10
- Temperature range
- 10 to 35°C
- Maximum falling height
- 2000 mm
- Resolution of displacement
- 1 mm
Heat sealer THS-A10
- Seal temperature
- Room temperature -250°C
- Control accuracy
- ± 0.2°C
- Dwell time
- 0.1 S to 999.9 S
Aging Oven TAO-A10
- The maximum temperature
- 300°C
- Temperature fluctuation
- Within ± 0.5°C
- Temperature uniformity
- Within ± 1°C
Rubber Testing Instruments
Rubber Low Temperature Brittleness Tester TRBT-A11
- Temperature control range
- Room temperature to -70 ℃ (room temperature ≤ 25 ℃）
- Temperature accuracy
- ± 0.3 ℃
- Impact speed
- 0℃ to -30℃ around 2.5 ℃/min '-30℃ to -40℃ around 2.5 ℃/min '-40℃ to -70℃ around 2.0 ℃/min
Rubber-weiss plasticity testing machine TRWM-A10
- Temperature range
- RT 50° to 300°
- Temperature accuracy
- ± 1°
- Measuring range
- 0.01 to 25 mm
DIN abrasion tester TDAT-A10
- Test arm weight
- 2.5 N
- Additional Loads
- 2.5 ± 0.1 N, 5 ± 0.1 N, 10 ± 0.1 N,
- Idler
- 150 mm
Three roll mill machine TRMM-A10
- Mixed capacity
- 0.5 to 1 kg, 2 to 3 kg, 5 to 7 kg
- Temperature range
- RT to 300°C
- Temperature control system
- PID control
NDT Testing Instruments
Digital Brinell hardness Tester TDBH-A10
- Test force
- 612.5 N, 980 N, 1225 N
- Brinell hardness test
- 1837.5 N, 2450 N, 4900 N/7350 N, 9800 N, 14700 N/29400 N
- Hardness measuring area
- 8 to 650 HBW (hard metals steel ball)
Rockwell hardness meter (motorized type) TRHM-B10
- Preliminary test force
- 98 N
- Total test force
- 588, 980, 1471 N
- Brinell hardness test
- 306, 613, 1839 N
Rockwell hardness meter TRHM-A10
- Preliminary test force
- 98 N
- Total test force
- 588, 980, 1471 N
- Total test force dwell time
- 0 to 30 S
Rockwell hardness meter TRHM-A11
- Preliminary test force
- 98 N
- Total test force
- 588, 980, 1471 N
- Total test force dwell time
- 1 to 30 S
Popular Categories
Navigation
Contact Us Map