Water absorption tester- Cobb Tester TP-C21

Whiteness and chromaticity tester TP-A10

• Sample (size) length
• Diameter ≥30 mm, Thickness ≤ 40 mm

• Measurement mode
• Diffuse reflection factor Rx, Ry, Rz, stimulus value Y10, X10, Z10, chromaticity coordinates x10, y10, z10; lightness L *, chroma a * b *, chroma C * ab, hue angle h * ab, dominant wavelength λd, excitement purity Pe, color difference ΔE * ab, lightness difference ΔL *, chroma difference ΔC * ab, hue difference ΔH * ab, Hunter system L , A, b

• Stability
• ≤ 0.1 within 30 min

Mullen burst tester TP-K10

• Measurement range
• 0 to 5600 kPa

• Accuracy
• ± 0.5 % F.S.

• Compression speed
• 170 ± 15 ml/min

Paper and cardboard thickness meter TP-E20

• Measuring range
• 0 to 4 mm

• Accuracy
• 0.01 or 0.001 mm

• Gauge
• Analogue gauge display

Pulp beating (refining) freeness tester TP-C10

• Measurement range
• 0 to 100° SR

• Sealed testing speed
• 100 ± 10 mm/s

• Volume of distilled water
• 1000 ± 5 ml

Vacuum Leak Tester TVLT-A10

• Vacuum degree
• 0 to 90 KPa

• Accuracy
• 1 % FS

• Resolution
• 0.1 KPa

Melt flow Indexer TMFI-A10

• Measuring range
• 0.01 to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm/ 10 min (MVR), 0.001 to 9.999 g/cm (melt density)

• Measuring rate
• 0.001 S

• Temperature range
• 50 to 400°C

Aging Oven TAO-A10

• The maximum temperature
• 300°C

• Temperature fluctuation
• Within ± 0.5°C

• Temperature uniformity
• Within ± 1°C

Lasting adhesive tester TLAT-A10

• Standard roller
• 2000 ± 50 g

• Testing stations
• 3

• Dimension (L*W*H) tester
• 320×210×550 mm (3 stations)

Mooney viscometer TMV-A10

• Control temperature range
• Normal temperature to 200°C

• Temperature display resolution
• 0.01°C

• Temperature control accuracy
• ± 0.3°

No rotor rheometer TNRR-A10

• Temperature tester
• Room temperature to 200°C

• Temperature display resolution
• 0.1°C

• Temperature control accuracy
• ≤ ± 0.3°C

DIN abrasion tester TDAT-A10

• Test arm weight
• 2.5 N

• Additional Loads
• 2.5 ± 0.1 N, 5 ± 0.1 N, 10 ± 0.1 N,

• Idler
• 150 mm

Rubber low temperature brittleness tester TRBT-A10

• Temperature range
• -60°C to 0°C

• Temperature accuracy
• ± 0.5°C

• Impact speed
• 2 m/s ± 0.2 m/s

Digital Brinell hardness Tester TDBH-A10

• Test force
• 612.5 N, 980 N, 1225 N

• Brinell hardness test
• 1837.5 N, 2450 N, 4900 N/7350 N, 9800 N, 14700 N/29400 N

• Hardness measuring area
• 8 to 650 HBW (hard metals steel ball)

Rockwell hardness meter TRHM-A11

• Preliminary test force
• 98 N

• Total test force
• 588, 980, 1471 N

• Total test force dwell time
• 1 to 30 S

Rockwell hardness meter (motorized type) TRHM-B10

• Preliminary test force
• 98 N

• Total test force
• 588, 980, 1471 N

• Brinell hardness test
• 306, 613, 1839 N

Portable Vibration Calibrator LPVC-A10

• Frequency (continually adjustable)
• 10 Hz to1280 Hz + 0.01 %

• Amplitude acceleration ( at 30m/s2 pk )
• 40 Hz to 320 Hz + 0.3 dB + 1 digit

• Amplitude velocity ( at 25mm / sec pk )
• 40 Hz to 320 Hz + 0.5dB +1 digit

Benchtop gloss meter TBGM-A10

• Test angle
• 60°

• Gloss aperture
• 2 × 3 mm

• Measurement range
• 0 to 1000 GU