Primary adhesive tester TPAT-A10

Charpy/ Izod Impact Tester TCI-A10

• Impact Speed & Energy (charpy)
• 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J

• Impact energy (Izod)
• 3.5 m/s for 1J, 2J, 4J, 5J, 7.5J, 15J, 25J

• Resolution of impact energy
• 0.001 J

Aging Oven TAO-A10

• The maximum temperature
• 300°C

• Temperature fluctuation
• Within ± 0.5°C

• Temperature uniformity
• Within ± 1°C

Melt flow Indexer TMFI-A10

• Measuring range
• 0.01 to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm/ 10 min (MVR), 0.001 to 9.999 g/cm (melt density)

• Measuring rate
• 0.001 S

• Temperature range
• 50 to 400°C

Melt flow Indexer TMFI-A11

• Measuring range
• 0.01to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm3/ 10 min (MVR), 0.001 to 9.999 g/ cm3 (melt density)

• Measuring rate
• 0.001 S

• Temperature range
• 50 to 400°C

Electronic bending stiffness tester TP-E10

• Testing speed
• 200° ± 20° / min

• Test range
• 1 to 10000 mN

• Indicating Error
• ± 1 %

Bekk Smoothness tester TP-L20

• Measuring scope
• ( 1 to 9999) s, divided in to (1 to 15) s, (15 to 300) s, (300 to 9999) s, the automatic (no. more than 200 s)

• Accuracy
• ±0.1 s within 300 s

• Vacuum system volume (ml)
• Bigger volume: 380 ± 1 Smaller volume: 38 ± 1

Carton compression tester TP-I11

• Measuring range
• 1 to 50 kN

• Indication error
• < ± 1%

• Platen Size
• 800×800 mm/ 1000×1000 mm/ 1200×1200 mm/ 1500×1500 mm (customized)

Tensile Stiffness Tester TP-B10

• Sample (size) length
• 38×70 mm

• Measuring range
• (1-500) mN.m (divided into 7 small ranges)

• Indication error
• 0.02

Rubber Low Temperature Brittleness Tester TRBT-A11

• Temperature control range
• Room temperature to -70 ℃ (room temperature ≤ 25 ℃）

• Temperature accuracy
• ± 0.3 ℃

• Impact speed
• 0℃ to -30℃ around 2.5 ℃/min '-30℃ to -40℃ around 2.5 ℃/min '-40℃ to -70℃ around 2.0 ℃/min

Mooney viscometer TMV-A10

• Control temperature range
• Normal temperature to 200°C

• Temperature display resolution
• 0.01°C

• Temperature control accuracy
• ± 0.3°

Rubber low temperature brittleness tester TRBT-A10

• Temperature range
• -60°C to 0°C

• Temperature accuracy
• ± 0.5°C

• Impact speed
• 2 m/s ± 0.2 m/s

DIN abrasion tester TDAT-A10

• Test arm weight
• 2.5 N

• Additional Loads
• 2.5 ± 0.1 N, 5 ± 0.1 N, 10 ± 0.1 N,

• Idler
• 150 mm

Rockwell hardness meter (motorized type) TRHM-B10

• Preliminary test force
• 98 N

• Total test force
• 588, 980, 1471 N

• Brinell hardness test
• 306, 613, 1839 N

Portable Vibration Calibrator LPVC-A10

• Frequency (continually adjustable)
• 10 Hz to1280 Hz + 0.01 %

• Amplitude acceleration ( at 30m/s2 pk )
• 40 Hz to 320 Hz + 0.3 dB + 1 digit

• Amplitude velocity ( at 25mm / sec pk )
• 40 Hz to 320 Hz + 0.5dB +1 digit

Digital Brinell hardness Tester TDBH-A10

• Test force
• 612.5 N, 980 N, 1225 N

• Brinell hardness test
• 1837.5 N, 2450 N, 4900 N/7350 N, 9800 N, 14700 N/29400 N

• Hardness measuring area
• 8 to 650 HBW (hard metals steel ball)

Rockwell hardness meter TRHM-A10

• Preliminary test force
• 98 N

• Total test force
• 588, 980, 1471 N

• Total test force dwell time
• 0 to 30 S

Benchtop gloss meter TBGM-A10

• Test angle
• 60°

• Gloss aperture
• 2 × 3 mm

• Measurement range
• 0 to 1000 GU