COBB sample cutter TP-C30

Ink rubber tester TP-F10

• Sample size (L*B)
• 230×50 mm (can join short samples together)

• Rub pressure
• 20 ± 0.2 N

• Friction speed
• 43 times / min

Pulp beating (refining) freeness tester TP-C10

• Measurement range
• 0 to 100° SR

• Sealed testing speed
• 100 ± 10 mm/s

• Volume of distilled water
• 1000 ± 5 ml

Softness tester TP-H10

• Measuring range
• 10 to 1000 mN

• Division value
• 1 mN

• Accuracy
• ± 1%

Carton compression tester TP-I10

• Measuring range
• 0.1 to 10 kN

• Indication error
• < ± 1%

• Platen Size
• 500×500 mm (customized)

Vacuum Leak Tester TVLT-A10

• Vacuum degree
• 0 to 90 KPa

• Accuracy
• 1 % FS

• Resolution
• 0.1 KPa

Falling Weight Impact Tester TFWT-A10

• Temperature range
• 10 to 35°C

• Maximum falling height
• 2000 mm

• Resolution of displacement
• 1 mm

Vicat softening temperature & HDT machine TVHT-A10

• Operating temperature
• Ambient temperature to 300°C

• Heating rate
• 50°C/ h (5 ± 0.5°C/ 6 min) , 120°C/ h (12 ± 1°C/ 6 min)

• Maximum temp. error with heating speed
• ± 5°C under 50°C/ h, ± 1°C under 120°C/ h

Heat sealer THS-A10

• Seal temperature
• Room temperature -250°C

• Control accuracy
• ± 0.2°C

• Dwell time
• 0.1 S to 999.9 S

Three roll mill machine TRMM-A10

• Mixed capacity
• 0.5 to 1 kg, 2 to 3 kg, 5 to 7 kg

• Temperature range
• RT to 300°C

• Temperature control system
• PID control

Rubber Low Temperature Brittleness Tester TRBT-A11

• Temperature control range
• Room temperature to -70 ℃ (room temperature ≤ 25 ℃）

• Temperature accuracy
• ± 0.3 ℃

• Impact speed
• 0℃ to -30℃ around 2.5 ℃/min '-30℃ to -40℃ around 2.5 ℃/min '-40℃ to -70℃ around 2.0 ℃/min

Rubber low temperature brittleness tester TRBT-A10

• Temperature range
• -60°C to 0°C

• Temperature accuracy
• ± 0.5°C

• Impact speed
• 2 m/s ± 0.2 m/s

Rubber-weiss plasticity testing machine TRWM-A10

• Temperature range
• RT 50° to 300°

• Temperature accuracy
• ± 1°

• Measuring range
• 0.01 to 25 mm

Rockwell hardness meter TRHM-A11

• Preliminary test force
• 98 N

• Total test force
• 588, 980, 1471 N

• Total test force dwell time
• 1 to 30 S

Portable Vibration Calibrator LPVC-A10

• Frequency (continually adjustable)
• 10 Hz to1280 Hz + 0.01 %

• Amplitude acceleration ( at 30m/s2 pk )
• 40 Hz to 320 Hz + 0.3 dB + 1 digit

• Amplitude velocity ( at 25mm / sec pk )
• 40 Hz to 320 Hz + 0.5dB +1 digit

Digital low load Vickers Hardness tester TDVH-A10

• Test force
• 9.8 N, 49 N, 98 N, 196 N, 294 N, 490 N

• Hardness value symbol
• HV1, HV5, HV10, HV20, HV30, HV250

• Error range in display
• ± 3.0 %, ± 2.0 %

Rockwell hardness meter TRHM-A10

• Preliminary test force
• 98 N

• Total test force
• 588, 980, 1471 N

• Total test force dwell time
• 0 to 30 S

Benchtop gloss meter TBGM-A10

• Test angle
• 60°

• Gloss aperture
• 2 × 3 mm

• Measurement range
• 0 to 1000 GU