Electronic bending stiffness tester TP-E10

Paper and cardboard thickness meter TP-E20

• Measuring range
• 0 to 4 mm

• Accuracy
• 0.01 or 0.001 mm

• Gauge
• Analogue gauge display

Mullen burst tester TP-K11

• Measurement range
• 0 to 1600 kPa

• Accuracy
• ± 0.5 % F.S.

• Compression speed
• 95 ± 5 ml/min

Vertical tensile tester TP-B20

• Sample (size) length
• 0 to 200 mm adjustable

• Sample width
• 15 mm

• Measuring range
• 0 to 30 N (tissue paper), 0 to 100 N,0 to 300 N, 0 to 500 N, 0 to 1000 N

Tensile Stiffness Tester TP-B10

• Sample (size) length
• 38×70 mm

• Measuring range
• (1-500) mN.m (divided into 7 small ranges)

• Indication error
• 0.02

Vicat softening temperature & HDT machine TVHT-A10

• Operating temperature
• Ambient temperature to 300°C

• Heating rate
• 50°C/ h (5 ± 0.5°C/ 6 min) , 120°C/ h (12 ± 1°C/ 6 min)

• Maximum temp. error with heating speed
• ± 5°C under 50°C/ h, ± 1°C under 120°C/ h

Heat sealer THS-A10

• Seal temperature
• Room temperature -250°C

• Control accuracy
• ± 0.2°C

• Dwell time
• 0.1 S to 999.9 S

Vacuum Leak Tester TVLT-A10

• Vacuum degree
• 0 to 90 KPa

• Accuracy
• 1 % FS

• Resolution
• 0.1 KPa

Primary adhesive tester TPAT-A10

• Inclined adjustable angle
• 0 to 40°

• Panel width
• 120 mm

• Test area width
• 80 mm

Mooney viscometer TMV-A10

• Control temperature range
• Normal temperature to 200°C

• Temperature display resolution
• 0.01°C

• Temperature control accuracy
• ± 0.3°

Three roll mill machine TRMM-A10

• Mixed capacity
• 0.5 to 1 kg, 2 to 3 kg, 5 to 7 kg

• Temperature range
• RT to 300°C

• Temperature control system
• PID control

DIN abrasion tester TDAT-A10

• Test arm weight
• 2.5 N

• Additional Loads
• 2.5 ± 0.1 N, 5 ± 0.1 N, 10 ± 0.1 N,

• Idler
• 150 mm

Rubber low temperature brittleness tester TRBT-A10

• Temperature range
• -60°C to 0°C

• Temperature accuracy
• ± 0.5°C

• Impact speed
• 2 m/s ± 0.2 m/s

Rockwell hardness meter (motorized type) TRHM-B10

• Preliminary test force
• 98 N

• Total test force
• 588, 980, 1471 N

• Brinell hardness test
• 306, 613, 1839 N

Portable Vibration Calibrator LPVC-A10

• Frequency (continually adjustable)
• 10 Hz to1280 Hz + 0.01 %

• Amplitude acceleration ( at 30m/s2 pk )
• 40 Hz to 320 Hz + 0.3 dB + 1 digit

• Amplitude velocity ( at 25mm / sec pk )
• 40 Hz to 320 Hz + 0.5dB +1 digit

Rockwell hardness meter TRHM-A10

• Preliminary test force
• 98 N

• Total test force
• 588, 980, 1471 N

• Total test force dwell time
• 0 to 30 S

Digital low load Vickers Hardness tester TDVH-A10

• Test force
• 9.8 N, 49 N, 98 N, 196 N, 294 N, 490 N

• Hardness value symbol
• HV1, HV5, HV10, HV20, HV30, HV250

• Error range in display
• ± 3.0 %, ± 2.0 %

Benchtop gloss meter TBGM-A10

• Test angle
• 60°

• Gloss aperture
• 2 × 3 mm

• Measurement range
• 0 to 1000 GU