Tensile Stiffness Tester TP-B10

Water absorption tester- Cobb Tester TP-C21

• Metal Cylinder inner area
• (100 ± 0.2) cm2

• Metal Cylinder height
• 50 mm

• Metal roller width
• (200 ± 0..5) mm

Water absorption tester TP-C20

• Measurement range
• 0 to 200 mm

• Specimen size
• 15×250 mm

• Division value
• 1 mm

Mullen burst tester TP-K10

• Measurement range
• 0 to 5600 kPa

• Accuracy
• ± 0.5 % F.S.

• Compression speed
• 170 ± 15 ml/min

Whiteness and chromaticity tester TP-A10

• Sample (size) length
• Diameter ≥30 mm, Thickness ≤ 40 mm

• Measurement mode
• Diffuse reflection factor Rx, Ry, Rz, stimulus value Y10, X10, Z10, chromaticity coordinates x10, y10, z10; lightness L *, chroma a * b *, chroma C * ab, hue angle h * ab, dominant wavelength λd, excitement purity Pe, color difference ΔE * ab, lightness difference ΔL *, chroma difference ΔC * ab, hue difference ΔH * ab, Hunter system L , A, b

• Stability
• ≤ 0.1 within 30 min

Vicat softening temperature & HDT machine TVHT-A10

• Operating temperature
• Ambient temperature to 300°C

• Heating rate
• 50°C/ h (5 ± 0.5°C/ 6 min) , 120°C/ h (12 ± 1°C/ 6 min)

• Maximum temp. error with heating speed
• ± 5°C under 50°C/ h, ± 1°C under 120°C/ h

Oxygen Index Tester TOIT-A10

• Resolution
• 0.1 % O2

• Measuring range
• 0 to 100 % O2

• Precision
• ± 0.4 % O2

Primary adhesive tester TPAT-A10

• Inclined adjustable angle
• 0 to 40°

• Panel width
• 120 mm

• Test area width
• 80 mm

Charpy/ Izod Impact Tester TCI-A10

• Impact Speed & Energy (charpy)
• 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J

• Impact energy (Izod)
• 3.5 m/s for 1J, 2J, 4J, 5J, 7.5J, 15J, 25J

• Resolution of impact energy
• 0.001 J

Mooney viscometer TMV-A10

• Control temperature range
• Normal temperature to 200°C

• Temperature display resolution
• 0.01°C

• Temperature control accuracy
• ± 0.3°

Three roll mill machine TRMM-A10

• Mixed capacity
• 0.5 to 1 kg, 2 to 3 kg, 5 to 7 kg

• Temperature range
• RT to 300°C

• Temperature control system
• PID control

DIN abrasion tester TDAT-A10

• Test arm weight
• 2.5 N

• Additional Loads
• 2.5 ± 0.1 N, 5 ± 0.1 N, 10 ± 0.1 N,

• Idler
• 150 mm

Rubber low temperature brittleness tester TRBT-A10

• Temperature range
• -60°C to 0°C

• Temperature accuracy
• ± 0.5°C

• Impact speed
• 2 m/s ± 0.2 m/s

Portable Vibration Calibrator LPVC-A10

• Frequency (continually adjustable)
• 10 Hz to1280 Hz + 0.01 %

• Amplitude acceleration ( at 30m/s2 pk )
• 40 Hz to 320 Hz + 0.3 dB + 1 digit

• Amplitude velocity ( at 25mm / sec pk )
• 40 Hz to 320 Hz + 0.5dB +1 digit

Digital low load Vickers Hardness tester TDVH-A10

• Test force
• 9.8 N, 49 N, 98 N, 196 N, 294 N, 490 N

• Hardness value symbol
• HV1, HV5, HV10, HV20, HV30, HV250

• Error range in display
• ± 3.0 %, ± 2.0 %

Rockwell hardness meter (motorized type) TRHM-B10

• Preliminary test force
• 98 N

• Total test force
• 588, 980, 1471 N

• Brinell hardness test
• 306, 613, 1839 N

Rockwell hardness meter TRHM-A11

• Preliminary test force
• 98 N

• Total test force
• 588, 980, 1471 N

• Total test force dwell time
• 1 to 30 S

Benchtop gloss meter TBGM-A10

• Test angle
• 60°

• Gloss aperture
• 2 × 3 mm

• Measurement range
• 0 to 1000 GU