Benchtop Multi-parameter Water Quality Meter LMPWM-A30
- pH Mode: <table cellspacing=0 border=1>
<tr>
<td style=min-width:50px>pH range </td>
<td style=min-width:50px>-2.00 to 20.00 pH</td>
</tr>
<tr>
<td style=min-width:50px>pH Accuracy </td>
<td style=min-width:50px>± 0.002 pH</td>
</tr>
<tr>
<td style=min-width:50px>pH Resolution </td>
<td style=min-width:50px>0.1/0.01/0.001 pH, selectable</td>
</tr>
<tr>
<td style=min-width:50px>pH Calibration Points </td>
<td style=min-width:50px>1 to 5 Points</td>
</tr>
<tr>
<td style=min-width:50px>pH Buffer Solutions </td>
<td style=min-width:50px>USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers</td>
</tr>
</table>
- mV Mode: <table cellspacing=0 border=1>
<tr>
<td style=min-width:50px>mV Range </td>
<td style=min-width:50px>-1999.9 to 1999.9 mV</td>
</tr>
<tr>
<td style=min-width:50px>mV Accuracy </td>
<td style=min-width:50px>± 0.2 mV</td>
</tr>
<tr>
<td style=min-width:50px>mV Resolution </td>
<td style=min-width:50px>0.1/1 mV, selectable</td>
</tr>
<tr>
<td style=min-width:50px>mV Calibration Points</td>
<td style=min-width:50px>1 Point</td>
</tr>
</table>
- Conductivity Mode: <table cellspacing=0 border=1>
<tr>
<td style=min-width:50px>Conductivity Range </td>
<td style=min-width:50px>0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm</td>
</tr>
<tr>
<td style=min-width:50px>Conductivity Accuracy </td>
<td style=min-width:50px>± 0.5% F.S.</td>
</tr>
<tr>
<td style=min-width:50px>Conductivity Resolution</td>
<td style=min-width:50px>0.01/0.1/1</td>
</tr>
<tr>
<td style=min-width:50px>Conductivity Calibration Points</td>
<td style=min-width:50px>1 to 5 Points</td>
</tr>
<tr>
<td style=min-width:50px>Conductivity Solutions</td>
<td style=min-width:50px>10, 84, 1413 µS/cm, 12.88, 111.8 mS/ cm</td>
</tr>
<tr>
<td style=min-width:50px>Conductivity Temperature coefficient </td>
<td style=min-width:50px>0.0 to 10.0 %/°C</td>
</tr>
<tr>
<td style=min-width:50px>Compensation mode </td>
<td style=min-width:50px>Linear or Pure Water</td>
</tr>
<tr>
<td style=min-width:50px>Cell Constant</td>
<td style=min-width:50px>K=0.1, 1, 10 or Custom</td>
</tr>
<tr>
<td style=min-width:50px>Reference temperature </td>
<td style=min-width:50px>20 or 25°C</td>
</tr>
</table>
- TDS Mode: <table cellspacing=0 border=1>
<tr>
<td style=min-width:50px>TDS Range</td>
<td style=min-width:50px>0 to 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)</td>
</tr>
<tr>
<td style=min-width:50px>TDS Accuracy </td>
<td style=min-width:50px>± 1 % F.S.</td>
</tr>
<tr>
<td style=min-width:50px>TDS Factor </td>
<td style=min-width:50px>0.1 to 1.0 (default 0.5)</td>
</tr>
</table>
