Handheld XRF Spectrometer LXRF-B10 (XRF stands for X-ray fluorescence) comes in special three level military-protection-box, which is compression free, moisture-proof and shockproof for convenient handling and for on field analysis. Rechargeable lithium battery 9000 mAh, sustainable work up to 12 hours. The core parts are Miniature X-ray tube, Fast-SDD detector, digital signal processor and micro multichannel intelligent analysis module. Designed with 5 inch HD screen with clear display, 360° rotation and multi-points operation. No need for sample preparation, direct measurement and analysis of the surface of goods that need to tested.
| Analytical Method | Energy dispersive X-ray fluorescence analytical Method |
| Elements Measuring | Atomic number from 12 to 92 [elements from magnesium (Mg) to uranium (U)] can be measured |
| Range | Simultaneous detector |
| Content measurement range | ppm to 100% |
| Detector | SDD detector, Simultaneous analysis 40 elements |
| Detector resolution | Minimum can reach 128 eV |
| Detection limit | Minimum detection limits at 1 to 500 ppm |
| Detection Objective Solid, liquid, powder | Detection Objective Solid, liquid, powder |
| The detection time | 1 to 60 seconds (a second report results) |
| Excitation source | 50 kV/200 uA- silver target end window integrated miniature X ray tube and high voltage power supply |
| Collimator and filter | Collimator diameters are 4.0 mm and 2.0 mm, 6 kinds of filters with automatic switching functions |
| Camera system | Built-in 500 W pixels high definition camera, to observe testing position at any time |
| Display screen | Brand new 5 inch transflective LCD touch screen, the resolution is 1080×720 |
| Built-in system | GPS, WIFI, Bluetooth |
| Power Supply | Rechargeable lithium battery, standard is 9000 mAh, sustainable work up to 12 hours |
| Ambient temperature | -20 to 50°C |
| Relative Humidity | ≤ 90% |
| Data transmission | Digital multi-channel technology, SPI data transmission, quick analysis, the high count rate; waterproof mini USB, and can be connected with a desktop computer |
| Warning-Signalling System | Green light means power on, red flushing means testing and yellow flushing means the problems |
| Dimension (L×W×H) | 244 × 90 × 330 mm |
| Weight | 1.7 kg |
- Energy dispersive X-ray fluorescence analytical Method
- Simultaneous analysis of 40 elements using single detector
- Digital multi-channel technology with SPI data transmission
- Designed with 5 inch HD screen with clear display, 360° rotation, multi-points operation
- Quick measurement and accurate testing of the samples for a long time by its test block
- Rechargeable lithium battery 9000 mAh, sustainable work up to 12 hours
- Integrated design of seal type with waterproof and dustproof function
- Built in memory battery continue replace the battery power
- Ergonomic, lightweight, handheld design, easy to carry, safe for transportation
- Large data storage through ultra-high frequency memory and mass storage space
Handheld XRF Spectrometer is used for the exploration of elemental composition from magnesium (Mg) to uranium (U), from parts per million to 100%. Used across scientific centres, Research labs for quality testing of materials through measurement of elements present.
XRF Spectrometer
Handheld XRF Spectrometer LXRF-B11
- Analytical Method
- Energy dispersive X-ray fluorescence analytical Method
- Elements Measuring
- Atomic number from 12 to 92 [elements from magnesium (Mg) to uranium (U)] can be measured
- Range
- Simultaneous detector
FTIR Spectrometer
FTIR Spectrometer LIR-B10
- Spectral Range
- 7800 cm-1 to 350 cm-1
- Resolution
- 0.85 cm-1
- Wave number precision
- ± 0.01 cm-1
Atomic Fluorescence Spectrometer
Atomic Fluorescence Spectrometer LAFS-A10
- Beam Configuration
- Dual Channel
- Elements ( Measuring Range )
- As, Se, Pb, Bi, Sb, Te, Sn< 0.01 µg/LHg, Cd< 0.001 µg/LZn< 1.0 µg/LGe< 0.1 µg/L
- Precision ( RSD )
- < 1.0
ICP Spectrometer
ICP Spectrometer LICP-A11
- Wavelength range
- 180 to 900 nm
- Elements per minute
- 15 elements
- Temperature
- 29 °C
ICP Spectrometer LICP-B10
- Monochromator Specifications
- Optical typeCzerny turnerResolution≤ 0.015nm (3600 line grating) ≤ 0.030nm (2400 line grating)Focal length1000 mmGrating specificationshuge holographic grating with 3600 L/mil or 2400 L/mil and 80 mm × 100 mm of ruling areaWavelength range195 to 500 nm for 3600 line grating 195 to 800 nm for 2400 line grating
- Solid State Power Specifications
- Frequency27.12 MHz Frequency stability: < 0.05%Spray chamberScott double pass spray chamberOutput power800 W to 1600 W, adjustable with power efficiency more than 65%Output power stability≤ 0.05%Induction coil25 mm × 3 ID (ID-internal diameter), equipped with three concentric quartz torch tubes 35 mm ED (ED-external diameter)
- Technical Specifications
- Suitable sample content rangeLiquid sample: 0.01 ppm to several thousand ppm Solid or power sample: 0.001% to 70%Repeatabilityshort-term stability- RSD ≤ 1.5% Long-term stability: RSD ≤ 2%Test speed5 to 8 elements / minLimits of detection (LOD, µg/L) for most elements1ppb to 10ppb
ICP spectrometer LICP-A10
- Wavelength range ( 3600 lines / mm )
- 180 to 500 nm
- Wavelength range ( 2400 lines / mm )
- 180 to 800 nm
- Temperature
- 20 ~ 28 °C
XRD Diffractometer
XRD Diffractometer LXRD-A10
- X-ray Tuble
- Glass tube, Ceramic tube, Ripple Ceramic tube: Cu, Fe, Co, Cr, Mo etc., Power 2 kW
- Focus Size
- 1 × 10 mm/ 0.4 × 14 mm/ 2 × 12 mm
- Stability
- ≤ 0.01 %
Popular Categories
Navigation
Contact Us Map