Rust Characteristics and Corrosion Tester LRCT-A12 is a multifunctional tester with high performance cost ratio. It is designed and made as per the International Standards ASTM D665 (Test Methods for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water), ASTM D130 (Test Methods for Detection of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test) and ASTM D7671 (Test Methods for Detecting Silver Corrosion from Jet Fuels by the Sliver Strip Test).

Sample hole 4 pieces
Ambient temperature Room temperature to 35°C
Temperature controlling range 0 to 100°C
Temperature controlling accuracy ± 1°C
Relative humidity ≤ 85 %
Timing range 1 min to 24 hours
Total power consumption ≤ 1800W
Dimensions 880 × 430 × 960 mm, 590 × 490 × 430 mm
Power supply AC 220 V ± 10 %, 50 Hz
  • LCD temperature controller
  • LED digital display for time
  • High performance cost ratio
  • Heater and electric stirrer to maintain the bath constantly
It is used to determine corrosiveness aviation gasoline, kerosene, turbine oil, vehicle gasoline, tractor fuels, washing solvent, distillate fuels, lubricating oil and other petroleum products.

Rust and Corrosion Tester

Lubricating Oil Rust Characteristics Tester LRCT-A11

Lubricating Oil Rust Characteristics Tester LRCT-A11

  • Sample hole
  • 4 pieces
  • Speed of stirring motor
  • 1400 rpm
  • Speed for sample stirring
  • 1000 ± 50 rpm
Liquefied Petroleum Gas Copper Corrosion Tester LRCT-A10

Liquefied Petroleum Gas Copper Corrosion Tester LRCT-A10

  • Sample hole
  • 2 pieces
  • Speed of stirring motor
  • 1400 rpm
  • Ambient temperature
  • 10 to 35°C
Copper Strip Corrosion Tester LRCT-A13

Copper Strip Corrosion Tester LRCT-A13

  • Sample hole
  • 4 pieces
  • Sample quantity
  • 4 to 12 pieces
  • Ambient temperature
  • Room temperature to 35 °C

Automatic Bomb Calorimeter

Automatic Bomb Calorimeter LABC-A10

Automatic Bomb Calorimeter LABC-A10

  • Calorimeter type
  • Isoperibol
  • Temperature range
  • 5 to 40°C
  • Measurement range
  • 5 to 40 MJ/ kg
Automatic Bomb Calorimeter LABC-B11

Automatic Bomb Calorimeter LABC-B11

  • Calorimeter type
  • Isoperibol
  • Oxygen filling
  • Semi-automatic
  • Bomb volume
  • 282 ml
Automatic Bomb Calorimeter LABC-A11

Automatic Bomb Calorimeter LABC-A11

  • Calorimeter type
  • Isoperibol
  • Temperature range
  • 5 to 40°C
  • Measurement range
  • 5 to 40 MJ/ kg
Automatic Bomb Calorimeter LABC-B10

Automatic Bomb Calorimeter LABC-B10

  • Calorimeter type
  • Isoperibol
  • Oxygen filling
  • Fully automatic oxygen filling & releasing, fully automatic bomb raising & lowering
  • Bomb volume
  • 250 ml

Octane Number & Cetane Number Tester

Octane Number and Cetane Number Tester LOCT-A10

Octane Number and Cetane Number Tester LOCT-A10

  •  Measuring Range For Aviation Gasoline
  • 86.0 to 105.0/MON
  •  Measuring Range For Gasoline For Motor Vehicles
  • National standard: 65.0 to 110.0/RON National-V standard: 70 to 115.0/RON Blended gasoline: 75.0 to 120.0/RON Light gasoline: 50.0 to 85.0 /MON Isomerized gasoline: 85.0 to 120.0/RON Arene gasoline: 90.0 to 120.0/RON
  •  Measuring Range For Ethanol
  • E93: 92.0 to 95.0/RON E97: 95.0 to 99.0/RON Judgement: 60.0 to 120.0/RON
Portable Octane Number and Cetane Meter LOCT-A20

Portable Octane Number and Cetane Meter LOCT-A20

  • Measurement item
  • motor gasoline and diesel
  • measurement unit of octane is ON
  • 40 to 120
  • Permissible error of octane
  • ± 0.5 max

Acid and Alkali Tester

Water Soluble Acid and Alkali Tester LAAT-A10

Water Soluble Acid and Alkali Tester LAAT-A10

  • Graduated flask
  • 100 ml,50 ml
  • Conical flask
  • 100ml
  • Separatory funnel
  • 250ml
Acid Number Tester LAAT-A12

Acid Number Tester LAAT-A12

  • Measurement range
  • ≥0.05 mg KOH/g
  • Potential measurement range
  • 0 to 1800.0 mV
  • Burette volume
  • 10 mL
Acid Number and Acidity Tester LAAT-A11

Acid Number and Acidity Tester LAAT-A11

  • Ambient temperature
  • ≤ 35 °C
  • Relative humidity
  • ≤ 85 %
  • Precision of titration tube
  • Scale division is 0.02 ml
Base Number Tester LAAT-A13

Base Number Tester LAAT-A13

  • Volumetric analysis
  • Titration condensation: 0.1 N; Controlling accuracy: ≤ ± 0.02 ml
  • Automatic acid titration
  • Titration condensation: 0.1 N; Controlling accuracy: ≤ ± 0.1 pH
  • Automatic potential control
  • Titration condensation: 0.1 N; Controlling accuracy: ≤ 10 mV

Aniline Test Equipment

Aniline Point Tester LAPT-A11

Aniline Point Tester LAPT-A11

  • Temperature controlling accuracy
  • ≤ 0.5 ℃
  • Temperature controlling range
  • Room temperature ~ 200 ℃
  • Power supply for illumination
  • 5 V
Aniline Point Tester LAPT-A10

Aniline Point Tester LAPT-A10

  • Measurement range
  • Room temperature ~ 150°C
  • Stirring speed
  • 0 ~ 1200 r / min
  • Heating power
  • 25 W