Lubricating Oil Rust Characteristics Tester LRCT-A11

Lubricating Oil Rust Characteristics Tester LRCT-A11 is designed and made as per the International Standard ASTM D665 - IP135. (Test Methods for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water).

Sample hole	4 pieces
Speed of stirring motor	1400 rpm
Speed for sample stirring	1000 ± 50 rpm
Ambient temperature	Room temperature to 35°C
Temperature controlling range	0 to 100°C
Temperature controlling accuracy	± 1°C
Temperature controller	Pt100
Relative humidity	≤ 85 %
Timing range	1 min to 24 hours
Heating power	600 W for temperature controlling; 1000 W for auxiliary heating
Total power consumption	≤ 1800 W
Dimensions	880 × 430 × 840 mm
Power supply	AC 220 V ± 10%, 50Hz

Digital temperature and time display
High-test efficiency
Timer to control test time and automatic timing

It is also suitable to determine rust-preventing characteristics of other oils, such as hydraulic pressure oil, circulation oil, as well as liquids heavier, whose gravity is greater than water.