Portable Dissolved oxygen meter LPRDO-A10 is equipped with polarographic sensor to measure the dissolved oxygen content. The manual salinity & barometric pressure compensation helps in accurate measurement of dissolved oxygen. It can store up to 48 sets of data & it is transferrable to PC via USB interface. Due to its portable nature this meter can be used across water purification plants, waste water management plants for testing & quality analysis.
| Dissolved oxygen range | 0.0 to 20.0 mg / L (or ppm) |
| Dissolved oxygen accuracy | ± 0.5 mg / L |
| Resolution | 0.1 mg / L |
| Calibration points | 1 - 2 points |
| Sensor type | Polarographic DO probe |
| Temperature compensation range | 0 to 40 °C, 32 °F to 104 °F |
| Barometric pressure correction | 60.0 to 112.5 kPa, 450 to 850 mmHg |
| Salinity correction | 0 - 35 g / L |
| % of saturation of oxygen range | 0.0 to 200.0 % |
| % of saturation of oxygen accuracy | ± 10 % F.S. |
| % of saturation of oxygen resolution | 0.001 |
| Data hold function | Manual |
| Reset function | Yes |
| Memory | Stores up to 48 sets of data |
| Output | USB communication interface |
| Display | LCD screen |
| Connector | 4-pin mini plug |
| Battery life | Approximately 150 hours |
| Power | 1 x 9 V / 800 mA battery |
| Dimension (L x W x H) | 185 × 88 × 32 mm |
| Weight | 300 g |
- Equipped with polarographic sensor & LCD display
- 1-2 points calibration using air saturated water & zero oxygen solution
- Manual salinity & barometric pressure compensation for better measurement of dissolved oxygen
- Stores up to 48 sets of data
- Data is transferrable to PC via USB interface
- Built-in real time clock stamps stores data to meet GLP standard
- Automatic temperature compensation for accurate measured value over the entire range
- Auto hold function freezes stable, final readings for better viewing and recording
- Reset function automatically resumes all the settings to default mode
- Help message as an operational guide for quick beginning to the dissolved oxygen meter
Portable Dissolve Oxygen Meter
Labtron portable meters are used in quality analysis of water and other solutions. With portability, waterproof features, finds applications in indoor as well as outdoor measurement of pH, ORP, dissolved oxygen, water hardness, salinity, TDS etc.
Portable dissolved oxygen meter LPRDO-A11
- Dissolved oxygen range
- 0.0 - 20.0 mg / L (or ppm)
- Dissolved oxygen accuracy
- ± 0.2 mg / L
- Resolution
- 0.01 mg / L
pH Meter (Benchtop)
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
Benchtop pH meter LBPM-B10
- pH measurement range
- -2.000 to 20.000 pH
- pH accuracy
- ± 0.002 pH
- Calibration points
- 1-5 points
Benchtop pH meter LBPM-A11
- pH measurement range
- 0.00 to 14.00 pH
- pH accuracy
- ± 0.01 pH
- pH resolution
- 0.01 pH
Benchtop pH meter LBPM-A20
- pH measurement range
- -1.00 to 15.00 pH
- pH accuracy
- ± 0.01 pH
- pH resolution
- 0.01 pH
Benchtop pH Meter LBPM-B11
- Temperature compensation
- 0 to 100°C, 32°F to 212°F Manual or Automatic
- Hold function
- Manual or automatic endpoint detection
- Stability criteria
- Standard or High-accuracy
Benchtop Conductivity Meter
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
Benchtop Conductivity Meter LBCM-A13
- Conductivity measurement range
- 0.000 μS/cm to 3000mS/cm
- Resistivity measurement range
- 5.00 Ω·cm to 100.0 MΩ·cm
- TDS measurement range
- 0.000 mg/L to 1000g/L
Benchtop Conductivity Meter LBCM-A14
- Conductivity Mode
- Conductivity measurement range0.01-20.0, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cmConductivity accuracy±1% F.S.Conductivity resolution0.001, 0.01, 0.1, 1Conductivity calibration points1 to 3 pointsConductivity calibration solutions10 µS/cm , 84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm
- TDS Mode
- TDS measurement Range0 to 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)TDS Accuracy± 1 % F.S.TDS Factor0.01 to 1.00 (default 0.5)TDS Calibration points3 points
- Temperature Mode
- Temperature range0 to 105°C, 32 to 221°FTemperature accuracy±1°CTemperature resolution0.1°C, 0.1°FTemperature calibration points1 pointTemperature Compensation Range and ModeManual or Automatic, 0 to 100°C , 32 to 212°FTemperature coefficient0.0 to 10.0 % per °C
Benchtop conductivity meter LBCM-A11
- Conductivity measurement range
- 0 - 20.0, 200.0, 2000 µS / cm, 200.0 mS / cm
- Conductivity accuracy
- ± 1 % F.S.
- Conductivity resolution
- 0.01, 0.1, 1
Benchtop Dissolved Oxygen Meter
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
Benchtop Dissolved oxygen meter LBDO-A11
- Dissolved oxygen range
- 0.0 to 20.0 mg / L (or ppm)
- Dissolved oxygen accuracy
- ± 0.2 mg / L
- Resolution
- 0.01 mg / L
Benchtop Dissolved oxygen meter LBDO-A10
- Dissolved oxygen range
- 0.0 to 20.0 mg / L (or ppm)
- Dissolved oxygen accuracy
- ± 0.5 mg / L
- Resolution
- 0.1 mg / L
Benchtop Ion Meter
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
Benchtop Ion meter for S, LBIM-A24
- Ion measurement range
- S range: 1×107 - 1M, 0.003-32100 ppm
- Ion measurement accuracy
- ± 1 % F.S.
- Resolution
- 0.001, 0.01, 0.1, 1
Benchtop Ion meter for Cl, LBIM-A10
- Ion measurement range
- Cl range: 5 × 106 - 1 M, 1.8 - 35500 ppm
- Ion measurement accuracy
- ± 0.5 % F.S.
- Resolution
- 0.001, 0.01, 0.1, 1
Benchtop Ion meter for Pb, LBIM-A25
- Ion measurement range
- Pb range: 1×108 – 0.1M, 0.2-20700 ppm
- Ion measurement accuracy
- ± 1 % F.S.
- Resolution
- 0.001, 0.01, 0.1, 1
Benchtop Ion meter for Ag, LBIM-A22
- Ion measurement range
- Ag range: 1 × 107 - 1 M, 0.01 - 107900 ppm
- Ion measurement accuracy
- ± 1 % F.S.
- Resolution
- 0.001, 0.01, 0.1, 1
Popular Categories
Navigation
Contact Us Map