Labtron manufactures an excellent quality, corrosion resistant sand test chamber that test the stability, quality, reactivity and characteristics of product against the sand and dust exposed environmental conditions. The test chamber is carefully designed as per the CE and ISO standards and provides protection against current leakage, overload, over-current, short circuit, over temperature, motor overheating, over pressure for safe and precise results.
| Temperature range | Ambient to + 50 ℃ |
| Relative Humidity | < 30 % RH |
| Normal wire diameter | 50 um |
| Normal width of a gap between wire | 75 um |
| The Talcum powder amount | 2 kg ~ 4 kg / m3 |
| Fight time | 0 ~ 99 H 59 M |
| Fan cycle time | 0 ~ 99 H 59 M |
| Specimen power outlet | Dust-proof socket AC220V 16A |
| Vacuum system | Equipped with a pressure gauge, air filter, pressure regulator, connecting tube |
| Circulating fan | Enclosed alloy low-noise motor, multi-vane centrifugal fan |
| Heating system | Independent Nichrome electronic heating system |
| Internal dimensions | 1000 × 1500 × 1000 mm |
| Overall dimensions | 1250 × 1900 × 1960 mm |
| Nominal power | 7500 W |
| Power supply | 380 V 50 Hz |
- PID programmable controller with LCD touch screen display
- Circulatory pump system uses effective dust re-cycle blowing
- Uses enclosed heater to keep dust dry
- Made up of corrosion resistant stainless steel material
- Protection against current leakage, overload, over-current, short circuit, over temperature, motor overheating, over pressure
Sand and Dust Test Chamber
In order to increase the durability of product, we need to test its performance under various conditions. Keeping this in mind, Labtron presents sand test chambers which simulate dust and sand conditions in a controlled atmosphere.
Sand and Dust Test Chamber LSC-A11
- Temperature range
- Ambient to + 50 ℃
- Relative Humidity
- < 30 % RH
- Normal wire diameter
- 50 um
Sand and Dust Test Chamber LSC-A13
- Temperature range
- Ambient to + 50 ℃
- Relative Humidity
- < 30 % RH
- Normal wire diameter
- 50 um
Sand and Dust Test Chamber LSC-A10
- Temperature range
- Ambient to + 50 ℃
- Relative Humidity
- < 30 % RH
- Normal wire diameter
- 50 um
Drug Test Chamber
Our Drug Test Chamber is designed for drug stability testing with precise temperature and humidity control. They are available in a range of capacities for variable testing needs. They are built with robust stainless steel construction, and high-quality insulation ensures uniform conditions and energy efficiency. These chambers also feature specialized illumination options for simulating diverse environmental conditions. Equipped with a user-friendly digital control system, and data logging capabilities, for reliable and accurate testing for pharmaceuticals.
Drug Stability Test Chamber LDST-A22
- Interior Volume
- 500 L
- Heat load
- 1000 W
- Temperature Range
- 0℃ to 100 ℃
Drug Stability Test Chamber LDST-A23
- Interior Volume
- 800 L
- Heat load
- 1000 W
- Temperature Range
- 0℃ to 100 ℃
Drug Stability Test Chamber LDST-A11
- Volume
- 250 L
- Temperature Range
- 0 - 65 °C
- Temperature Fluctuation
- ± 0.5 °C
Drug Stability Chamber with Illumination LDST-B10
- Volume
- 150 L
- Temperature Range(without illumination)
- 0 - 65 °C
- Temperature Range(with illumination)
- 10 °C - 65°C
Ozone Test Chamber
Labtron Ozone Test Chamber are designed for precise environmental testing with controlled ozone generation. These are equipped with advanced temperature and humidity control systems and ensure consistent testing parameters. They offer flexibility to adjust ozone output settings for a broad spectrum of testing needs. Our chamber programmable operations for precise evaluation of materials to meet high performance and regulatory standards.
Ozone Test Chamber LOC-A14
- Diameter of holder (mm)
- 900
- Length of each side (mm)
- 460
- Temperature range
- 0℃ ~ 100℃
Ozone Test Chamber LOC-A10
- Temperature range
- 0℃ ~ 100℃
- Humidity range
- 30 % - 98 % R.H
- Temperature fluctuation
- ± 0.5 ℃
Ozone Test Chamber LOC-A12
- Diameter of holder (mm)
- 600
- Length of each side (mm)
- 220
- Temperature range
- 0℃ ~ 100℃
Ozone Test Chamber LOC-A11
- Diameter of holder (mm)
- 400
- Length of each side (mm)
- 180
- Temperature range
- 0℃ ~ 100℃
Plant Growth Chamber
Labtron Plant Growth Chamber features precise temperature and humidity control for optimal plant development. These chamber feature adjustable shelves and provide flexibility to accommodate various plant sizes. They are integrated with a user-friendly interface for real-time monitoring of variable parameters. Our Plant Growth Chambers come in various capacities to meet diverse research needs, offering both lighting and non-lighting options.
Salt Spray Test Chamber
Labtron Salt Spray Test Chambers offers a diverse range of capacities to accommodate various testing needs. Our chamber features dual spray types, and provides flexibility in testing methods, ensuring accurate evaluation of corrosion resistance. They employ precise spray deposition rates to enable accurate simulation and assess material durability. These chambers are integrated with advanced monitoring systems for reliability and accuracy in corrosion testing.
Salt Spray Test Chamber LSSC-A13
- Testing room capacity
- 780 L
- Temperature range
- Ambient to +60°C
- Humidity range
- 95% to 98% RH
Salt Spray Test Chamber LSSC-A11
- Testing room capacity
- 326 L
- Temperature range
- Ambient to +60°C
- Humidity range
- 95 to 98% RH
Salt Spray Test Chamber LSSC-A14
- Testing room capacity
- 1030 L
- Temperature range
- Ambient to +60°C
- Humidity range
- 95% to 98% RH
Salt Spray Test Chamber LSSC-A12
- Testing room capacity
- 410 L
- Temperature range
- Ambient to +60°C
- Humidity range
- 95 to 98% RH
Popular Categories
Navigation
Contact Us Map