Disintegration tester LDIT-A12

Disintegration tester LDIT-A12 is adopted with high-precision digital electronic sensor, ensures quality precision and accuracy of the water bath temperature without need for calibration. Equipped with two to three sets of basket, conducts independent disintegration experiments. The default setting for lifting time of the basket is 15 mins, can manually set the other time value as per the experimental need.

Number of basket lifting set	3 sets
Lifting frequency of the basket	30 to 32/ min
Lifting distance of basket	55 ± 1 mm
Minimum spacing from screen to bottom of beaker	25 ± 2 mm
Mesh size	2 mm (as per standard configuration )
Automatic time range	5 to 120 min
Work noise	< 60 dB
Temperature prefabrication range	Room Temperature to 50°C, display resolution: 0.1 °C
Temperature control accuracy	± 0.3°C
Time prefabrication range	1 to 900 min
Time control accuracy	0.5 min
Accuracy of temperature control	37 ± 0.5°C
Dimension (L × W × H)	540 × 320 × 440 mm
Power supply	220 V/50 Hz
Total power	600 W
Gross Weight	25 kg

3 sets of basket with 18 tubes (6 in each basket)
Independent driving for each station
Microprocessor controlled automation system
Even °C temperature maintenance in water bath
Transparent organic glass for water bath
Increase and decrease splash proof buttons
Automatic system for controlling temperature, time, frequency
Alternative display for the preset and real time data
Auto-diagnose, auto-alarm system for over-temperature

Used for detection of rate of disintegration of solids such as tablets, capsules, pills in required /set (prescriptive) conditions at pharmaceutical industry.