Air Jacketed CO₂ Incubator LAJI-C20

Overview

Air Jacketed CO ₂ Incubator LAJI-C20 is a shaking CO₂ incubator with air jacketed configurations suitable for heat/UV sterilization and temperature range of 4˚ to 65˚C with shaking frequency of 40 to 300 rpm. Designed with CO₂ concentration sensor, advanced alarm system, temperature control and monitoring system, it provides uniform and stable conditions. Incorporated 90˚ C high temperature sterilization method, touch screen with PID controller, and enhanced safety features provides the benefits of contamination control and uncompromising temperature uniformity for even the most demanding incubations.

Specifications :

CO2 range	0-20%
CO2 recovery time	(Return to 5% after opening the door for 30 seconds) ≤3 mins
CO2 control accuracy	±0.1%
CO2 stability of 5%CO2	±0.1%
CO2 uniformity	±0.1%
CO2 sensor	IR CO2 sensor
Shaking frequency	40-300 rpm
Shaking Precision	±1 rpm
Amplitude	20 mm
Drive way	Three eccentric shaft balance drive type
Humidity control	50 to 90%
37C humidity control accuracy	The chamber can reach 85%-95% when 37˚ C , and the humidity can be controlled in real time
Humidity resolution	0.001
Humidity deviation	±2%
Related humidity	Nature vaporate > 95%
Allowable shaking load	10 kg
Temperature control range	4-65° C
Temperature control accuracy	±0.1° C
Temperature uniformity	±0.5° C
Temperature sensor	PT 100
Environment temperature detector	Independent
Over temperature protection system	Independent
Temperature recover time	(Return to 37˚ C after opening the door for 30 sec) ≤8 mins
Heating method	6 side heating
Disinfection method	90˚ C high temp
Timing range	0 to 99 hour 59 min
Platform size (L×B)	350×350 mm
Shelf	1
Display	Digital Color display with touch panel
Sterilization system	90 degree high temp. high humidity sterilization system (RHP); UV sterilization (option)
Controller	PID
Interface	RS485
Door Open/close message	Yes
Alarm system	High and low temperature and over temperature; Chamber sensor failure; Independent temperature limiter; Door open; High/low CO2 condensation; Power off alarm; Door temperature sensor failure; Disinfection and sterilization status reminder; Over temp sensor failure and Abnormal function
Interior dimension (W×D×H)	505×600×420 mm
Exterior dimension (W×D×H)	693×875×753 mm
Gross Weight	91 kg
Power	1500 W
Voltage	220V 50Hz
Flask Configuration	50 ml×36, 100 ml×23, 250 ml×13, 500 ml×8, 1 L×5, 2 L×3, 4 L×1, 5 L×1

Features :

• -  Touch screen interface with Screen lock while functioning
• -  Infrared CO₂ concentration sensor with PT100 temperature sensor
• -  Outer door ring with heating function
• -  Independent environment temperature detector
• -  UV lamp at the back top of chamber
• -  90 degree high temperature and high humidity sterilization system with One touch simple sterilization function
• -  Short sterilization cycle (18 hours) with 72 hours machine performance
• -  Heating elements: Located on all 6 sides of the chamber
• -  Alarm system: High and low temperature and over temperature; Chamber sensor failure; Independent temperature limiter; Door open; High/low CO₂ condensation; Power off alarm; Door temperature sensor failure; Disinfection and sterilization status reminder; Over temp sensor failure and Abnormal function
• -  Data logging capabilities with PID controller
• -  Designed to minimize contamination