Labtron LFP Series is economical and ideal, designed to cover a varied measurement range of Potassium from 0 - 156 ug / mL and Sodium from 0 - 184 ug / mL. Pre-selection of flame size is an added on advantage. It has a wide range of applications in industrial, clinical experiments and pathology research.
| Elements Detected | K, Na, Li, Ca | ||||||||
| Aspiration Rate | 2 to 6 mL / min | ||||||||
| Air Supply | 6 L / min at 11 psi ( Oil and moisture free ) | ||||||||
| Response Time | < 8 s | ||||||||
| Repeatability | 1 % CV for 20 consecutive samples | ||||||||
| Sensitivity |
| ||||||||
| Range |
| ||||||||
| Linearity |
| ||||||||
| Dimension | 770 x 560 x 390 mm | ||||||||
| Power supply voltage | ( 220 ± 22 ) V | ||||||||
| Frequency | ( 50 ± 1 ) Hz | ||||||||
| Gross weight | 22 kg |
- Flameout protection device
- Small quantity of sample required
- Dual channel to read K and Na testing simultaneously
- Pre-opting of flame sizes
- Flameout protection device
- Environmental temperature is 10 ℃ to 35 ℃
- Relative humidity is ≤ 85%
Used for analyzing & measuring the content & concentration of K, Na elements. Testing cement, glass, ceramics, fertilizers and soil, mining, petroleum, chemical products, pharmaceutical, beverages, MSW testing, scientific research, health, education and other fields.
Flame Photometer
Flame Photometer LFP-A10
- Elements Detected
- K, Na
- Aspiration Rate
- 2 to 6 mL / min
- Air Supply
- 6 L / min at 11 psi ( Oil and moisture free )
Flame Photometer LFP-A11
- Elements Detected
- K, Na, (Li is optional)
- Aspiration Rate
- 2 to 6 mL / min
- Air Supply
- 6 L / min at 11 psi ( Oil and moisture free )
Flame Photometer LFP-A20
- Elements Detected
- K, Na, Li
- Aspiration Rate
- 2 to 6 mL / min
- Air Supply
- 6 L / min at 11 psi ( Oil and moisture free )
Flame Photometer LFP-A21
- Elements Detected
- K, Na,Ca
- Aspiration Rate
- 2 to 6 mL / min
- Air Supply
- 6 L / min at 11 psi ( Oil and moisture free )