Air Jacketed CO₂ Incubator LAJI-C21

Overview

Air Jacketed CO₂ Incubator LAJI-C21 is a cooling and shaking incubator comprising single orbital platform with triple eccentric shaft balance drive, offers 40 to 300 rpm of speed. Adopted with six sides direct heating, auto-adjustable cycle fan speed, door heating system, and compressor this incubator offers continuous operation within 0 to 5999 min and 4 to 65°C of temperature range. Fluorine-free design with 304 stainless steel chamber, shelves, and platform with round curved corners, it is a load bearing structure provide excellent durability and performance. Equipped with IR sensor, color touch screen controller, password lock function, 90° high temperature and sterilization system, it has unique air duct design. With CO₂ concentration sensor, advanced alarm system, temperature control and monitoring system, Micro-biological & HEPA filter this incubator ensures controlled, uniform and stable conditions.

Specifications :

CO2 range	0-20%
CO2 recover time	(Return to 5% after opening the door for 30 seconds) ≤3 mins
CO2 control accuracy	±0.1%
CO2 stability of 5%CO2	±0.1%
CO2 uniformity	±0.1%
CO2 sensor	IR CO2 sensor
Shaking frequency	40 to 300 rpm
Drive way	Three eccentric shaft balance drive type
Humidity control	50 to 90% RH
37°C humidity control accuracy	85% to 95% RH
Humidity resolution	0.001
Humidity deviation	±2%
Allowable shaking load	15 kg
Temperature control range	4 to 65° C
Temperature uniformity	±0.5° C (test point at 37°C)
Ambient temperature	25°C
Heating method	6 side direct heating
Sterilization method	90˚ C moist heat sterilization
Timing range	0 to 5999 min
Platform movement	Orbital
Platform size (L×B)	450×450 mm (1pc)
Shelf	3 pcs
Display	Colorful touch screen controller
Sterilization system	90° high temp. high humidity sterilization system
Filter	Microbiological and HEPA filter
Motor	Low heat rejection brushless DC motor
Interface	RS485
Alarm system	Temperature deviation, over temperature, high/low speed, door open, high/low CO2 condensation, disinfection and sterilization reminder, auto cut-off of heat and fan, and auto-stop
Orbital diameter	20 mm+AO2
Interior dimension (W×D×H)	605×700×520 mm
Exterior dimension (W×D×H)	793×975×853 mm
Gross Weight	98 kg (approx.)
Power	1800 W
Voltage	220V 50Hz
Flask Configuration	50 ml×36, 100 ml×23, 250 ml×13, 500 ml×8, 1 L×5, 2 L×3, 4 L×1, 5 L×1

Features :

• -  CO₂ cooling and shaking incubator with air jacketed configurations
• -  Single orbital platform with triple eccentric shaft balance drive
• -  6 sides direct heating with auto-adjustable cycle fan speed
• -  Door heating system at outer door and large toughened inner glass door for observation
• -  Continuous operation within 0 to 5999 min and 4 to 65°C of temperature range
• -  Fluorine-free design with 304 stainless steel chamber, shelves, and platform with round curved corners
• -  Low heat rejection brushless DC motor with high start torque
• -  CO₂ control and monitoring system with IR sensors
• -  Pollution proof control with Micro-biological & HEPA filter
• -  90° high temperature and sterilization system for thoroughly sterilization of chamber
• -  Large color touch screen controller with password lock function
• -  Unique air duct design with high quality compressor
• -  Load bearing structure provide excellent durability and performance
• -  Alarm system: Temperature deviation, over temperature, high/low speed, door open, high/low CO2 condensation, disinfection and sterilization reminder, auto cut-off of heat and fan, and auto-stop
• -  High- efficiency, with low power consumption